Pond thermostat | TS1000 Pond thermostat | TS1000
Pond thermostat | TS1000 Pond thermostat | TS1000
Pond thermostat | TS1000
3 Reviews | Add review
Heating controller | waterproof IP68 temperature sensor

Product number

VN2030061

€ 58,90
excl. VAT
€ 71,27
incl. VAT
Price per unit
Quantity: 
Order
 

Pond thermostat + waterproof sensor

The pond thermostat monitors the water temperature in the pond. It can switch a pump or electric heater on and off based on the set temperature.
Professional solution for automatically controlling the water temperature in a pond or water basin.

This pond thermostat has a 230-volt output as a built-in 'socket'. The external temperature sensor, in industrial design with waterproof casing, measures the temperature under water.
The LED light tells you whether the heater, or a connected device, is switched on.

Digital switching thermostat

You can also use the pond thermostat as a digital thermometer, for monitoring and reading the temperature.
The highest and lowest measured temperatures are stored in memory. Set temperatures remain in memory even when the mains power is cut.
The pond thermostat has an attractive case with a clear red LED display and is intended for indoor placement.

Keep your pond frost-free automatically?

You can also order the pond thermostat as a pond frost-free set, as a combination with a waterproof heating cable. This produces heat when the water in the pond is in danger of freezing.

Remote temperature monitoring

The box is not suitable for outdoor placement. For the temperature sensor, however, this is of course no problem.

The connecting cable of the supplied Pt1000 sensor may be extended up to 50 m. If it is interrupted or short-circuited, a fault message appears.
Please note: the end of the sensor must be secured so that it cannot be moved by (running) water.

Pond thermostat - technical info

•    Measuring range: -99...+850 °C
•    Connected load: 3,000 W
•    Output: 16 A changeover contact
•    Connection voltage: 230 V
•    Power cable length: approx. 1.6 m
•    Power consumption: approx. 2 W
•    Operation: via 3 push buttons
•    Dimensions: 180x80x60 mm
•    Waterproof sensor: Pt1000
•    Sensor type: Pt1000
•    LED display: red, 12.7 mm
•    Indicator lights: 3x LED
•    Safety class: IP20
•    EN manual: yes
•    Quality mark: CE

Included:
Waterproof temperature sensor with 1 m or 10 m cable + connector that fits into cabinet of pond thermostat.

Order by:

Add review
Rik - 24-10-2022 16:14

Apparaat werkt perfect op 0,1 graad nauwkeurig. De voeler registreert snel. Simpel in te stellen.

Vincent - 13-11-2021 14:23

Werkt erg goed, en vooral - nauwkeurig!

Nick - 03-03-2018 16:48

Deze besteld maar door een foutje werd een ander model geleverd.
Een belletje en ik had al gauw de goede in huis

*snelle levering
*goede service over de telefoon
*het juiste apperaat snel in huis
*apperaat werkt perfect en toont geen afwijking in temp.

This website uses cookies to measure visits, we do not store any personal data.
Accept selected cookies