Product description
Underfloor heating for motor home
Thin foil floor heating. Operates on safe 24 V low voltage. Easy to apply under the floor covering of motor home or caravan.
Underfloor heating and Watts
The thermal capacity of this film is 100 watts per m². A higher output is not justified because of the floor covering. Tip: Lay insulating boards under the foil as far as possible to make optimal use of the heat.
Applications
Prefab kits, cut to length yourself
This camper floor heating is available in six different lengths. If necessary, you can shorten the foil length, simply with scissors. Then re-insulate the end with tape! (You cannot change the width: so measure carefully before ordering) The foil is available in strips with a FIXED width of 20cm, 40cm and 60cm. Delivery is possible with a choice of different connection cables, see options.
Matching lightweight power supply
You can order a 24 Volt power supply especially for this heating foil. It has connection terminals for 3 prefab sets up to a total area of 3 m².
Mounting instructions for heat film
- Apply on level ground, preferably an insulated subfloor
- No heavy or sharp objects on the film and material not kinked
- Apply only under uncovered areas of the floor covering
- Multiple strips can run on a single 24 V mains supply of sufficient power
NB: Returns are not possible as this is a custom-made item. Of course, the normal guarantee scheme applies.
Tip: we also supply 12-volt heating foil.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our webshop.
