Product description
Pond temperature gauge, which is also suitable for other wet applications. With switching contact and waterproof temperature sensor.
Built-in temperature gauge, compact reading and control box. At any time, you can accurately read the temperature in the water, or automatically switch on an electrical appliance when a certain temperature is reached.
This pond temperature gauge is very easy to operate. You determine its switching temperature yourself, in increments of one (1) degree Celsius.
The set switch-on and switch-off temperatures are retained. This smart pond temperature gauge also has a memory for the highest and lowest measured temperature.
Applications
Switching contact up to 5 amps
The switching contact can drive an alarm, to warn of too high or too low water temperature. This allows the temperature gauge to be used as pond thermostat.
The single-pole contact is potential-free and can therefore switch different voltages (12 V, 24 V or 230 V). When the relay is switched on, the green light illuminates.
Operates on safe low voltage
The temperature controller operates on 12 Volt DC voltage, e.g. from a battery or the optional mains power supply. In reading mode, its power consumption is very low.
Waterproof sensor with 2 m cable
The temperature sensor is type Pt1000. It has high accuracy and is completely waterproof. The sensor's 2-wire signal line is 2 m or (as an option) 10 m long.
The sensor cable can easily be extended to 50 metres. Note: Secure end of sensor so that it cannot move with flowing water.
Assembly tips
The temperature gauge can be built into a panel made of metal, wood or plastic. In this, you only need to make a 97 x 43 mm rectangular hole.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our webshop.
