Product description
Programmable pool level control with 230-volt output. Choice of various water sensors, or a plastic float with 10-metre connection cable.
It makes no difference to the sensor whether the water basin is made of metal, plastic or concrete. Examples: swimming pool, well, cellar, pond, aquarium, tank, rainwater storage.
Applications
Level control with one sensor
Thanks to clever electronics, this controller needs only one sensor. On the front panel of the pool level controller is screw plug for easy connection of the matching 2-wire water sensor or float. See selection bar Sensor version.
After detection of water by float/sensor, a notification follows and 230 Volt mains voltage becomes available at the built-in socket. You can connect a pump or solenoid valve to this.
Level control with many functions
- For refilling and emptying
- Level and/or time controlled
- Water sensor or float switch
- Switching 230 V on or off
Menu-driven pool control
Using the drop-down menu, you enter four parameters to completely customise the control to your needs.
- FUNC: value 1 = switch-on delay | value 2 = switch-off delay.
- SEnS: water sensor sensitivity, prevents too slow or too fast response.
- dEL: duty cycle/ switching delay, adjustable in steps, from 1 sec to 2.8 hours.
- rEL: switching function of the output, 230 V ON or OFF (for switching on or off).
Simple status check with lights
LED green: sensor detects water
LED red: programming mode (menu)
LED yellow: relay is switched on
Setting is easy using 2 push buttons for increasing and decreasing the respective parameter. You do this for each of the four steps.
Tip: first try the menu functions to familiarise yourself with the control before installing it. With a saucer of water, you can easily test the reaction of the control to a wet sensor.
Output for 230V mains voltage
The built-in, earthed socket can control a pump or water valve or an alarm signal. This level controller is universal and can be used for both refilling and draining. Also for applications other than swimming pools.
Its setting options allow you to customise it to your specific application. For example, prevention of false alarms and protection against a pump running dry.
*) Delivery includes water sensor with 10 m or 30 m cable + corresponding plastic mounting bracket or stainless steel or plastic float with mounting bracket.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our webshop.
