Product description
*** Price including 2 sensors ***
Universal temperature switch for heating, cooling and temperature monitoring. Many possibilities, e.g. for temperature monitoring, thanks to 4 potential-free switching contacts. The display shows switch-on and switch-off temperatures, current (measured) temperatures, set parameters and minimum/maximum values. The latter is the memory for the highest and lowest measured temperature.
Applications
Switches cooling and heating
Based on the set switch-on and switch-off temperature, the controller determines whether heating or cooling is performed. This temperature switch has separate contacts suitable for switching 230 volts and monitoring temperature limits.
Alarm function for temperature monitoring
The temperature switch can trigger an alarm if the measured temperature goes outside the set range. You can set a delay time for this, up to a maximum of 8 hours. This function is useful, for example, for temperature monitoring in a stable or animal housing. Each channel has its own relay for alarms. For example, to monitor tracing pipes for frost protection. The built-in buzzer can also be used for this purpose (according to your choice).
Digital thermometer and energy saving
This temperature controller can also be used as a 2-channel temperature gauge (digital thermometer), e.g. for cooling and storage. Another application is energy saving for a domestic hot water circulation pump, by measuring the temperature on inlet and outlet boiler pipe. The pump will then only run when hot water is requested.
Temperature switch 7 basic functions
- Digital temperature gauge for channel 1
- Digital temperature gauge for channel 1 + 2
- Temperature switch on channel 1
- Temperature switch on channel 1 + 2
- Temperature differential controller
- Control for circulation pump
- Manual (other applications)
* channel 3, 4, 5 is with alarm function.
2-channel temperature switch
- Faaie plastic housing, intended for wall mounting
- This control contains 4 switching contacts of 5 amps each
- 3 LEDs per channel: switching contact, alarm contact and fault
- Sensors with metal tip, also suitable as pipe sensors
- Sensor connection wires may be extended up to 50 metres
- Fault message in case of interrupted or short-circuited sensor
Wide temperature range
It can be switched to any temperature within the range from -55 to +125 °C. Between -10 and + 85 °C, this controller is accurate to half a degree. Set temperatures remain in memory if the mains voltage is lost.
Delivery includes two (2) sensors
NB: basic knowledge of electrical and control engineering is required to connect and commission this product.
Alternative: temperature differential switch.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our webshop.
