Product description
Play it safe with the new WD 1000 water detector, because in case of unwanted water contact, this smart device will immediately raise the alarm and you can react quickly. Think of a burst water pipe (in the basement), heavy rainfall, a faulty dishwasher or washing machine or (flooding) water from outside. You can place the three-metre cable with sensor at the desired location and as soon as it comes into contact with water, the integrated alarm is activated. This is both an if acoustic and visual alarm in the form of an audible sound and red flashing light.
Applications
Water alarm function - Easy to use
You want to detect a water leak at an early stage and the WD 1000 water alarm makes that possible. As soon as the sensor contacts come into contact with water then the alarm is triggered. The most common applications are detecting leaks, including in hot water boilers, for example. But this water alarm can also function as additional protection for float switches or water level switches. Prevent major consequential damage with the protection of a water alarm.
Specifications
- Operating voltage: 230 V ~, 50 Hz
- Power consumption (standby): approx. 0.5 W
- Trigger sensitivity: approx. 100 kΩ
- Volume (alarm): approx. 82 dB (at a distance of 1 m)
- Sensor: water sensor (included)
- Sensor cable: approx. 3 m (extendable to 20 m)
- Dimensions WD 1000: 98 x 59 x 42 mm, without connector
- Water sensor dimensions: 75 x 30 x 8 mm
- Protection rating: IP20
Present on delivery of the water detection system
- Water detector WD 1000
- Water sensor (cable length 3 m)
- Operating instructions German / English
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our webshop.
