Solenoid valve controls water flow
The solenoid valve can be controlled with 230 volts, e.g. via a water level controller. When its sensor detects water, the water supply is automatically shut off.
For this purpose, the water alarm must have a relay output suitable for switching 230 Volt mains voltage.
Options: half-inch (1/2"), three-quarter-inch (3/4") and inch (1"), with internal thread.
Only current consumption in open condition
Principle: the solenoid valve is closed current-free. This means that in normal condition, with the valve closed, it consumes no power. The orifice allows water to pass through after applying 230 V or 24 V power.
Robust industrial design. Coil orientation 360 degrees: may be mounted in any position. Price includes solenoid coil and 230 Volt or 24 Volt connector.
Magnetic valve - technical data
Control voltage: 230 V or 24 V
Connection: connector/ plug
NC = currentless closed
Options: ½" or ¾" or 1"
Input: mark 1
Output: mark 2
Material: brass and stainless steel
Operating pressure: 0.3...20 bar
Media temp: -10...+90 °C
Flushing capacity: 10 VA
Safety class: IP65
Quality mark: CE
Option: half inch
• Fitting: 1/2" female thread
• Max. volume: 63 litres/min
• Weight: 400 g
Option: three-quarter inch
• Fitting: 3/4" female thread
• Max. volume: 90 litres/min
• Weight: 600 g
Option: 1 inch
• Fitting: 1" female thread
• Max. volume: 160 litres/min
• Weight: 800 g