Switching system receiver 1 or 3 channels

A switching unit that you can operate wirelessly over a distance of up to 150 m. The memory has room for 1 to 32 different remote controls/users.

Remote control - examples

This wireless receiver is intended for fixed installation, in a switch panel or meter cupboard.
It can be used universally for switching climate equipment (heating, ventilation), electric doors, entrance gates, awnings, roller shutter controls, pond installations, pumps, lighting in animal housing or garden, etc.

Secure wireless switching system

The system uses the advanced AES128 protocol. This so-called 'rolling' encrypty code is very difficult to crack, as each data packet sent is one-time.

The accompanying remote control transmitter fits on a keychain.

Receiver module

The power supply of the devices to be controlled (or thermostats or electrical groups) runs via this receiver module.
It is possible to switch 230 V devices, but other voltages (e.g. 12 or 24 V) are also permitted, as the relay contacts are potential-free.

With 1 or 3 switching contacts

There are two versions of this receiver. The simple version can switch one electrical device remotely. The 3-channel version allows you to switch 2 or 3 devices on and off independently. The 3-channel version can switch a higher current.

Switching system receiver 1 channel

•    Type: HT-1E
•    Own supply voltage: 12 Vdc
•    Own consumption: max. 100 mA
•    Contacts: 1 x potential-free
•    Output: 1 x changeover contact
•    Max. AC current: 5 A (230 V)
•    Max. DC current: 5 A (24 V)
•    Relay turn-off time: 200 ms
•    Dimensions: 68x58x22 mm
•    Frequency band: 868 MHz
•    Selectable frequencies: 1
•    Memory in case of power failure: yes
•    Switch-on limitation: yes
•    Range: max. 150 metres
•    Programmable: yes
•    Indicator light: 3x LED
•    Programming: 1 push button
•    Color: black (plastic)
•    Manual: German+English
•    Operating range: -10 ...+40 °C
•    Weight: 50 g
•    Quality mark: CE

Switching system receiver 3 channels

•    Type: HT-3E
•    Own supply voltage: 12 Vdc
•    Own consumption: max. 200 mA
•    Contacts: 3 x potential-free
•    Output: 3 x changeover contact
•    Max. AC current: 12 A (230 V)
•    Max. DC current: 10 A (24 V)
•    Relay turn-off time: 200 ms
•    Dimensions: 92x84x36 mm
•    Frequency band: 868 MHz
•    Selectable frequencies: 3
•    Memory in case of power failure: yes
•    Switch-on limitation: yes
•    Range: max. 150 metres
•    Programmable: yes
•    Indicator light: 3x LED
•    Programming: 1 push button
•    Color: black (plastic)
•    Manual: German+English
•    Operating range: -10 ...+40 °C
•    Weight: 130 g
•    Quality mark: CE

NB: basic electrical engineering knowledge is required for installation.