Product description
Play it safe with the new WD 1000 water detector, because in the event of unwanted water contact, this smart device immediately raises the alarm and you can respond quickly. Think of a burst water pipe (in the basement), heavy rainfall, a defective dishwasher or washing machine or (flood) water from outside. The three meter long cable with sensor can be placed in the desired location and as soon as it comes into contact with water, the integrated alarm is activated. This is both an audible and a visual alarm in the form of an audible sound and red flashing light.
Applications
Water alarm function - Easy to use
You want to discover a water leak at an early stage and that is possible with the WD 1000 water alarm. As soon as the sensor contacts come into contact with water, the alarm is set in motion. The most common applications are detecting leaks, also in hot water boilers, for example. But this water alarm can also function as additional protection for float switches or water level switches. Prevent major consequential damage with the protection of a water alarm.
Specifications
- Operating voltage: 230 V ~, 50 Hz
- Power Consumption (Standby): Approx. 0.5W
- Trigger Sensitivity: Approx. 100 kΩ
- Volume (alarm): approx. 82 dB (at a distance of 1 m)
- Sensor: water sensor (included)
- Sensor cable: approx. 3 m (extendable to 20 m)
- Dimensions WD 1000: 98 x 59 x 42 mm, without connector
- Water sensor dimensions: 75 x 30 x 8 mm
- Degree of protection: IP20
Present with delivery of the water detection system
- Water detector WD 1000
- Water sensor (cable length 3 m)
- Operating instructions German / English
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.