Product Description
Lime removal is possible in several ways. The electronic descaler is the most modern method of limescale removal. This device literally solves limescale problems. It is powerful enough for the entire installation in a home or restaurant.
Electronic water treatment is not only effective but also environmentally friendly. The main argument is that no substances are extracted or added to the water. The quality and composition of drinking water are safeguarded, while retaining the useful minerals in the water. Old limescale in pipes is gradually broken down and then disposed of in dissolved form with the tap water.
Applications
Operating the electronic descaler
The electronic descaler contains a signal generator that applies a field around and in the water pipe, based on capacitive impulse technology. This field has a variable resonance frequency, causing the water in the pipe to lose its tendency to deposit limescale.
The lime particles are bound to the iron particles, after which they come out with the water. This technology gives better results than an anti-scaling magnet or an electromagnetic descaler.
The electronic descaler works completely maintenance-free but is not suitable for installation in damp rooms. The generator is microprocessor-controlled and you can set it to six different frequency ranges. This allows you to select the most effective setting for your own situation.
The optimal setting depends, among other things, on the hardness of the water, the flow rate, the pipe material and the diameter of the pipe.
Tip: choose the automatic setting first and try later (after at least 2 months) whether one of the other settings gives better results. Choose the highest frequency if the water is very hard.
Installing the descaler after the water meter
The field coils should preferably be installed after the water meter. There is no need to break the water pipe to do this. Using the material supplied, make two coils of 10 windings each around the pipe. This is described and illustrated in the manual provided. Leave approx. 10 cm of free space between the two windings. Optimal distance: 3 to 4 times the pipe diameter.
For metal and plastic pipes
The electronic descaler works on pipes made of iron, copper, stainless steel, steel and plastic (PVC). It makes no difference whether this pipe runs horizontally or vertically.
A right-angled bend in the middle between the two windings is permitted. Place the generator box nearby, at a maximum distance of 50 cm from the pipe.
Specifications
- Signal indication: 7x LED
- Operation: push button (mode)
- Supply voltage: 230 V
- Power cable length: approx. 175 cm
- Field frequencies: 1...32 kHz
- Setting selection: 6 ranges
- Maximum flow rate: 50 litres/min
- Pipe diameter: max. 40 mm
- Energy consumption: 1.5 VA (watts)
- Dimensions: 160x80x60 mm
- Safety class: IP50
- Manual: German
- Manufacturer's guarantee: 2 years
- Hallmark: CE
Tip: also check the limescale neutralizer.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.