Product description
Temperature gauge for checking high temperatures. Compact reading and control box with switching contact for e.g. an alarm. Complete with temperature sensor on a heat-resistant cable.
With this temperature gauge, you can check the temperature at any time at a certain spot, such as a pipe, tube or other metal surface. This makes it possible to trigger an alarm when a dangerous temperature is reached.
Applications
Setting in 0.1 degree increments
The flue gas temperature gauge is very easy to operate. You determine its switching temperature yourself, in 0.1 degree Celsius steps.
The switch-on and switch-off temperatures you set yourself are remembered. This smart temperature gauge also has a memory for the highest and lowest measured temperature.
Switch contact up to 5 Amps
The temperature gauge also works as a temperature switch. Namely, it has a voltage-free (potential-free) switching contact. This single-pole contact can switch different voltages (12 V, 24 V or 230 V). The green light shows that the contact is switched on.
Temperature gauge on safe low voltage
This flue gas temperature gauge operates on 12 Volt DC voltage, e.g. from a battery or the optional mains power supply. Via a mains adapter, it can also operate at 230 volts; see selection option.
Surface temperature sensor
The temperature sensor is of type
Pt1000. It has a high accuracy and can measure temperatures up to 400 Celsius. You may extend the sensor's 2-wire signal line up to 50 m. The temperature gauge can be built into a panel made of metal, wood or plastic. In this, you only need to make a 97 x 43 mm rectangular hole.
Specifications
• Supply voltage: 10...15 Volt dc
• Internal current consumption: approx. 60 mA
• Output: potential-free NO contact
• Switching current: 5 A (250Vac/ 30Vdc)
• Switching capacity: max. 1000 Watt
• Display: LED red, 12.7 mm high
• Indicator lights: 3x LED
• Control range: -99...+850 °C
• Measuring accuracy: +/-0.5°
• Reading accuracy: +/- 0.1°
• Memory function: yes
• Display resolution: 0.1°C
• Sensor input: connector
• Dimensions: 101x47x35 mm
• Manual: German + English
• Safety class: IP20
Specifications - sensor
• Type: Pt1000 (stainless steel)
• Range: -50...+400 °C
• Sensor tip: flat
• Cable: 2 m with stainless steel jacket
Note: mains power supply + DC cable can be ordered as an option.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.