Product description

A mixing valve (also known as a mixing valve or thermostatic control) is used to safely tap hot water.

This temperature limiter is placed in the outgoing pipe of a (solar) boiler, water heater, or combi boiler, or in the hot water supply of the shower.

Applications

Hot water directly from the boiler can pose a risk of burn. In addition, it uses energy by losing unnecessary heat in pipes.

In solar boiler systems, the water temperature can rise to near boiling point. Hot tap water is difficult, dangerous for children and can be harmful to devices such as dishwashers and washing machines.

Mixing in cold water

The solution is a mixing valve that acts as an automatic thermostatic control for hot water. It limits the top temperature of the hot water before it goes to the taps.

The control is done by mixing in dosed cold water. This way, you achieve a constant water temperature at each tap.

Mixing valve for professional use

The mixing valve is robust in design. Suitable for sanitary installations (with or without ring main) in nursing homes, sports complexes, and schools.

Energy saving by reducing pipe losses. This control can also be applied for floor heating with circulating water.

Mixing valve controls water temperature

This mixing valve is infinitely adjustable (rotary knob) between 35 and 65 degrees. It comes with the illustrated 3/4 inch fittings with gasket set and a comprehensive manual.

Mounting in the outgoing circuit of the (solar) boiler, electric boiler, or combi boiler. This temperature control works very reliably, without wires or electronics!

Specifications

•   Water capacity: 1.90 m3/h
•   Design: robust, brass
•   Connections: G1 and R3/4"
•   Adaptors: included
•   Setting: rotary knob (manual)
•   Control range: +35...+65 °C
•   Inlet temperature: < +90 °C
•   Operating pressure: up to 10 bar
•   Seals: asbestos-free
•   Brand: Resol MA10
•   Manual: DUI + EN

Order by:

Add review

No reviews found.