Pond frost protection set | TS1000+IP68+FV25
Pond frost protection set | TS1000+IP68+FV25
0 Review | Add review
Set for frost-free pond with temperature control

Product number

TS1000+IP68+FV25

€ 155,90
excl. VAT
€ 188,64
incl. VAT
Price per unit
Quantity: 
Order
 

Keep your pond frost-free with temperature control

Want to keep your pond frost-free in winter? You can do it with a special waterproof heating cable and a digital pond thermostat.
Lay the rolled-out heating cable at the bottom of the pond. This ensures optimal heat transfer and high efficiency, because all the heat is transferred to the water.

Heating cable keeps the pond frost-free

Tropical fish (koi) do not like frost... This waterproof self-regulating cable keeps the pond frost-free. After winter, simply bring the heating cable back up.
Please note: this set is intended to prevent the water from freezing, so not for heating for breeding purposes.

Frost-free pond with waterproof cable

The length of the heating cable determines the heat output. There are 7 different lengths, for keeping ponds up to about 20 cubic metres (m³) frost-free:
•    5 metres/ 125 Watts - up to 4 m³ = 4,000 litres.
•    8 metres/ 200 Watts - up to 6 m³ = 6,000 litres.
•    12 metres/ 300 Watt - up to 9 m³ = 9,000 litres.
•    16 metres/ 400 Watt - up to 11 m³ = 11,000 litres.
•    20 metres/ 500 Watt - up to 14 m³ = 14,000 litres.
•    25 metres/ 625 Watt - up to 17 m³ = 17,000 litres.
•    30 metres/ 750 Watts - up to 21 m³ = 21,000 litres.

'Too high' power does not mean higher energy consumption. It does mean that the controller may switch off sooner, because the set temperature (a few degrees above zero) has been reached.
Important: spread the heat cable well out on the pond floor. Tip: check in advance that there is enough space for the selected cable length!

Pond heater - waterproof sensor

The matching pond thermostat works with an external temperature sensor. It measures the temperature in the water just above the heating cable.
The connecting wire is 10 m, but you can easily extend it to 50 m. If the sensor wire is interrupted or short-circuited, the thermostat displays a fault message.

Pond thermostat - control box

With the digital thermostat you can set the switching temperature. It should be placed in a dry room, e.g. shed or storeroom. The LED light shows immediately whether the heating is switched on.

Connect the heating cable and sensor to the control box. If necessary, use a 230 V extension cable for the heating cable.

Check the pond temperature

You can use the pond thermostat as a digital thermometer for checking the temperature at the same time. The water temperature can be read all year round, i.e. even when the heater is switched off.
The highest and lowest measured temperatures are stored in memory. Set temperatures remain in memory if the mains power is cut.

Heating cable - specifications

•    Type: self-regulating tracing
•    Power per metre: 25 W
•    Diameter: 11 x 6 mm (oval)
•    Connecting cable: approx. 4 m long
•    Connection sockets: watertight
•    Mains plug: with protective earth
•    Connection voltage: 230 V
•    Test marks: CE, VDE, KEMA
•    Safety class: IP54

Pond thermostat - specifications

•    Connection voltage: 230 V
•    Connected load: < 3,000 W
•    Output: safety plug
•    Operation: with three push buttons
•    Dimensions: 160 x 80 x 60 mm
•    Waterproof sensor: Ø 6 mm
•    Sensor connection wire: 10 m
•    LED display: red, 12.7 mm
•    Indicator lights: 3 x LED
•    Safety class: IP20
•    EN manual: yes
•    Hallmark: CE

A Pond Frostproof Set includes:

1.    Heating cable (choose from 7 lengths).
2.    Waterproof temperature sensor + 10 m cable.
3.    Digital pond thermostat with read-out display.

Note: Secure end of sensor so that it cannot move due to (running) water.
 

Order by:

Add review

No reviews found.

This website uses cookies to measure visits, we do not store any personal data.
Accept selected cookies Reject cookies