Temperature gauge + waterproof sensor

Pond temperature gauge, which is also suitable for other wet applications. With switching contact and waterproof temperature sensor.

Built-in temperature meter, compact display and control box. At any time you can accurately read the temperature in the water, or automatically switch on an electrical device when a certain temperature is reached.

This pond temperature meter is very easy to operate. You determine its switching temperature yourself, in steps of one (1) degree Celsius.

The set switch-on and switch-off temperatures are retained. This smart pond temperature meter also has a memory for the highest and lowest measured temperature.

Switching contact up to 5 Amps

The switch contact can trigger an alarm to warn if the water temperature is too high or too low. This allows the temperature gauge to be used as a pond thermostat.

The single-pole contact is potential-free and can therefore switch different voltages (12 V, 24 V or 230 V). When the relay is switched on, the green light is on.

Operates on safe low voltage

The temperature controller operates on 12 Volt DC, for example from a battery or the optional power supply. In reading mode, its power consumption is very low.

Waterproof sensor with 2 m cable

The temperature sensor is of the Pt1000 type. It has a high accuracy and is completely waterproof. The 2-wire signal line from the sensor is 2 m or (optionally) 10 m long.

The sensor cable can be easily extended up to 50 meters. Note: Secure the end of the sensor so that it cannot move with running water.

Assembly tips

The temperature gauge can be built into a metal, wood or plastic panel. In it you only need to make a rectangular hole of 97 x 43 mm.

Pond temperature gauge - technical data

• Supply voltage: 10...15 Volts dc
• Own power consumption: approx. 60 mA
• Output: potential-free make contact
• Switching current: 5 A (250Vac/ 30Vdc)
• Switching capacity: < 1000 Watt
• Display: LED red, 12.7 mm high
• Indicator lights: 3x LED
• Control range: -99...+850 °C
• Measurement accuracy: ±0.5 °C
• Reading resolution: ±0.1 ºC
• Memory function: yes
• Display resolution: 0.1 °C
• Sensor input: terminal block
• Dimensions: 101x47x35mm
• Manual: German + English
• Protection class: IP20

Technical data sensor

• Sensor principle: Pt1000
• Sensor housing length: 50 mm
• Sensor housing diameter: 6 mm
• Class: IP68 (waterproof)
• Connection cable: 2-wire