Product description
Pond temperature gauge, which is also suitable for other wet applications. With switching contact and waterproof temperature sensor.
Built-in temperature meter, compact display and control box. At any time you can accurately read the temperature in the water, or automatically switch on an electrical device when a certain temperature is reached.
This pond temperature meter is very easy to operate. You determine its switching temperature yourself, in steps of one (1) degree Celsius.
The set switch-on and switch-off temperatures are retained. This smart pond temperature meter also has a memory for the highest and lowest measured temperature.
Applications
Switching contact up to 5 Amps
The switch contact can trigger an alarm to warn if the water temperature is too high or too low. This allows the temperature gauge to be used as a
pond thermostat.
The single-pole contact is potential-free and can therefore switch different voltages (12 V, 24 V or 230 V). When the relay is switched on, the green light is on.
Operates on safe low voltage
The temperature controller operates on 12 Volt DC, for example from a battery or the optional power supply. In reading mode, its power consumption is very low.
Waterproof sensor with 2 m cable
The temperature sensor is of the Pt1000 type. It has a high accuracy and is completely waterproof. The 2-wire signal line from the sensor is 2 m or (optionally) 10 m long.
The sensor cable can be easily extended up to 50 meters. Note: Secure the end of the sensor so that it cannot move with running water.
Assembly tips
The temperature gauge can be built into a metal, wood or plastic panel. In it you only need to make a rectangular hole of 97 x 43 mm.
Specifications
- Supply voltage: 10...15 Volts dc
- Own power consumption: approx. 60 mA
- Output: potential-free make contact
- Switching current: 5 A (250Vac/ 30Vdc)
- Switching capacity: < 1000 Watt
- Display: LED red, 12.7 mm high
- Indicator lights: 3x LED
- Control range: -99...+850 °C
- Measurement accuracy: ±0.5 °C
- Reading resolution: ±0.1 ºC
- Memory function: yes
- Display resolution: 0.1 °C
- Sensor input: terminal block
- Dimensions: 101x47x35mm
- Manual: German + English
- Protection class: IP20
Specifications - sensor
- Sensor principle: Pt1000
- Sensor housing length: 50 mm
- Sensor housing diameter: 6 mm
- Class: IP68 (waterproof)
- Connection cable: 2-wire