Product description
The solenoid valve can be controlled with 230 volts, e.g. via a water level controller. When its sensor detects water, the water supply is automatically shut off.
For this purpose, the water alarm must have a relay output suitable for switching 230 Volt mains voltage.
Options: half-inch (1/2"), three-quarter-inch (3/4") and inch (1"), with internal thread.
Applications
Only current consumption in open condition
Principle: the solenoid valve is closed current-free. This means that in normal condition, with the valve closed, it consumes no power. The orifice allows water to pass through after applying 230 V or 24 V power.
Robust industrial design. Coil orientation 360 degrees: may be mounted in any position. Price includes solenoid coil and 230 Volt or 24 Volt connector.
Specifications - magnetic valve
- Control voltage: 230 V or 24 V
- Connection: connector/ plug
- NC = currentless closed
- Options: ½" or ¾" or 1"
- Input: mark 1
- Output: mark 2
- Material: brass and stainless steel
- Operating pressure: 0.3...20 bar
- Media temp: -10...+90 °C
- Flushing capacity: 10 VA
- Safety class: IP65
- Quality mark: CE
- Option: half inch
• Fitting: 1/2" female thread
• Max. volume: 63 litres/min
• Weight: 400 g
Option: three-quarter inch
• Fitting: 3/4" female thread
• Max. volume: 90 litres/min
• Weight: 600 g
Option: 1 inch
• Fitting: 1" female thread
• Max. volume: 160 litres/min
• Weight: 800 g
Specifications - valve ball valve
- Type: Ball valve
- Main connection: 230V
- Flow: < 216 l/min
- Working pressure: 0-10 bar
- Option: 2-way NC
- Connection: 1" internal
- Manufacturer: IC
- Material: stainless steel 304
- Weight: - g
- Temperature: -10...+90 °C
- Included: Connection wire 2-wire (choose without connector or control cable)
- Power consumption: < 10 VA
- Safety class: IP65
- Quality mark: CE
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.