Switching system relay module

A switch box you can control with a remote control. Depending on the handheld transmitter and the situation on site, the distance to be bridged is up to 200 metres.

The receiver of this switching system contains 8 relays with voltage-free changeover contacts. That means you can switch up to 8 electrical devices on and off independently of each other.

See also the simple plug-in receiver.

Switching system for universal use

For use in homes and other buildings. Switching of almost all electrical devices is possible. Lighting, electric awnings, (garage) door openers, alarm systems, pumps, pond installations, heating.

The box is not suitable for outdoor use; of course, you can connect long switching wires or build in the receiver.

8 relays with changeover contacts

The cabinet of the switching system contains 8 relays, each with a potential-free changeover contact. This means you can switch different voltages on and off. Load capacity per contact: 12 A for mains voltage or 10 A at 24 V DC voltage.

Radio remote control

The switching system can be set to 3 different frequencies in the 868 MHz band. It can be controlled simultaneously by several remote controls (transmitters): see Related products.

Receiver relay module - specifications

•    MHz: 868.35/ 869.05/ 869.55
•    Receiver antenna: included
•    Operating voltage: 12 Vdc
•    Internal consumption: max. 400 mA
•    Current consumption in idle state: 50 mA
•    Indicator lights: 17 x LED
•    Connected load: max 3,000 W
•    Switch contacts: 8 x changeover
•    Load capacity: permanent
•    Cable input: via 8 cable glands
•    Dimensions: 115 x 56 x 90 mm
•    Housing: solid plastic, grey
•    Manual: English + German
•    Operating range: -10 ...+40 °C
•    Weight: 600 g
•    Quality mark: CE

NB: basic electrical engineering knowledge is required for connection!