Thermostat IP54 | surface mounted model
Electronic temperature control with an external sensor. For controlling electrical heating, ventilation or cooling devices that operate on 230 Volt mains voltage.
Also for humid environment
This surface-mounted thermostat has a robust plastic box for wall mounting. This thermostat is also suitable for use in a humid environment, such as a stable.
Simple operation with rotary knob for setting the temperature. Everything works immediately; programming is not necessary.
Thermostat controls up to 3600 watts
Applicable for, among other things, controlling heating cables and equipment for frost protection. You can connect several 230 V heating cables (connected in parallel) to this control.
The compact plastic housing is intended for wall mounting and is equipped with a rotary knob.
For cooling and heating
The temperature control has 2 line ranges (from 0 to +60 Celsius), which you can set with a switch.
The connection cable (2-wire) of the supplied sensor may be extended, up to a maximum of 100 metres.
The switch contact (relay) provides 230 Volt output if the temperature measured (by the sensor) is lower than the set temperature.
Thermostat IP54 - specifications
- Manufacturer: Eberle (German)
- Dimensions: 122x120x56mm
- Connection voltage: 230 Volt
- Connected load: 3,600 W
- Switching current: max. 16 A
- Switching contact: potential free
- Own consumption: < 4 VA
- Control/setting range: 0...+60 °C
- Sensor option: 1.5 or 4.0 m
- Indicator lights: 2x LED
- Protection class: IP65
- Cable glands: 3x, included
- Manual: Dui+Eng
- Test mark: CE