Mat set for electric underfloor heating

Mat + recessed thermostat as a complete set for electric underfloor heating in wet rooms. The mat is applied under tiles, in tile adhesive or levelling compound. The waterproof heating cable is spirally stitched onto a thin mesh mat for proportional heat distribution. The cable is only 3 mm thick and all joints are waterproof. The heating mat is 50 cm wide and available in various lengths/surfaces.

Thin underfloor heating in tile adhesive

The heat output is tailored to bathrooms, kitchens and other (wet) rooms with tiled floors, where rapid heating is required. The thermostat switches off the power as soon as the floor reaches the set temperature.

Thermostat for automatic temperature control

Each mat comes complete with a built-in thermostat of your choice: this thermostat regulates the temperature of the floor fully automatically, via a sensor in the floor. The end of the sensor cable must be installed in the heated area.

Mat with choice of 3 thermostats

When ordering, you can choose from a number of different thermostats:
•    TH89 - touch thermostat
•    Wi-Fi - control via internet

These are clock thermostats with a weekly program, which are mounted in a normal wall box for 230V connection. The corresponding temperature sensor and an instruction manual are included. If you order the thermostat together with a mat, it will be cheaper!

Mat for underfloor heating - specifications

•    Type: application in tile adhesive
•    Adhesive backing: yes
•    Heat capacity: 155 W/m²
•    Dimensions: 0.5...12 m²
•    Installation height: < 3.5 mm
•    Connection voltage: 230 V
•    Cable with earth screen: yes
•    Dual-core: prevents radiation
•    Connection wire length: 1x 3 m
•    Wires: phase, neutral, earth
•    Manual: Dutch
•    Hallmarks: VDE + CE