Product description
Underfloor heating for 12 Volt
Underfloor heating in the form of thin foil. Operates on safe 12 Volt low voltage. Easy to apply under the carpet in a motorhome, caravan or boat. Tip:
click for 24 Volt heating foil.
Underfloor heating and power
The heat capacity of this foil is 55 or 110 Watt per m². More power is not safe because of the carpet on it. Tip: use insulation boards (if possible) under the foil, so that the heat emitted is used optimally.
Applications
Prefab strips, cut to length yourself
The 12 Volt underfloor heating is available in different lengths. If necessary, you can shorten the foil length, simply with a pair of scissors. Then insulate the end again with tape! (You cannot change the width: so measure carefully before ordering). The foil is available in strips with a FIXED width per 15cm or 20cm. Delivery includes 2 insulated connection wires of 2.5 m (shortening/cutting allowed).
Matching power supply or transformer
Especially for this heating foil there is a
12 Volt power supply with connection terminals for 3 prefab sets. This has a built-in fan that makes noise. An alternative is a silent transformer, with the disadvantage of slightly more weight.
Installation instructions for heat foil
-Apply on a flat surface, preferably an insulated subfloor.
- Do not place any heavy or sharp objects on the film and material.
-Only apply under uncovered parts of the floor covering.
-Multiple strips can be connected to one 12 V power supply or transformer (check power).
Specifications
- Widths: Per 15cm (55 W/m²) or 20cm (110 W/m²)
- Lengths: 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500cm
- Power: 55 W/m² or 110 W/m²
- Working voltage: 12 Volt
- Principle: infrared carbon foil
- Material thickness: 3mm
- Connecting wires: 2x 250 cm- 0,75 mm2
- Test mark: CE
NB: Returns are not possible because this is a custom item. Naturally, the normal warranty scheme applies.