Product description
Self-adhesive prefabricated underfloor heating mat for electric underfloor heating. Tiled floors in kitchen, living room, bathroom, toilet, canteens, etc.
By cutting, the floor heating mat can be divided into two -or more- adjacent strips, each 50 cm wide; see illustration.
Applications
Available without or with thermostat
This set for floor heating consists of a heating cable on a mat and a built-in thermostat. Optionally manual or with clock; see below for more info.
This thermostat works with an external temperature sensor, which is installed in the floor. For expansion (additional floor heating mat on the same thermostat), the mats are available separately.
Installing the underfloor heating mat
The electric heating wires are sewn -with a fixed spacing- to a mesh mat, which is provided with an adhesive backing. This mat is rolled out on the subfloor and then completely embedded in a thin layer of levelling compound, mortar or tile adhesive.
Because the mat is very thin, it can easily be incorporated into the adhesive of a new tiled floor -on top of the old floor- when renovating.
At one end of the underfloor heating mat is the connection cable, which also contains the return line. Three wires come out of it: phase, neutral and earth.
Caution! Do not order too large; an underfloor heating mat cannot be shortened! In practice, underfloor heating under 70-80% of the free floor area is sufficient.
Specifications - underfloor mat heating
• Mat length: 2x the m2 value
• Mat width: 50 cm
• Mat material: nylon mesh
• Building height: 3.3 mm
• Heat capacity: 155 Watt/m²
• Connection voltage: 230 Volt
• Connecting cable: 1 x 3 m long
• Shielding: internal earthing sleeve
• Protected: via earth leakage switch
• Including: manual
This is a simple temperature control with an on/off switch and a dial for the temperature. You can immediately see from the light whether the heater is on.
• Type: manual control
• Connection voltage: 230 V
• Connected load: 3,500 W
• Switching contact: 16 A
• Control range: +5...40 °C
• Sensor: external (3 m)
• Temperature: rotary knob
• On/off switch + lamp
• Color: off white
• Installation depth: 30 mm
• Safety classes: IP20
• Included: floor sensor
• Manual: English
• Hallmark: CE
This intelligent control has two sensors, which measure the air temperature (in the room) and the temperature in the floor. This keeps the energy consumption of the underfloor heating mat to a minimum.
Menu-driven clock thermostat with touch screen operation. Thermostat settings are retained if the mains power is cut.
Specifications - clock thermostat
• Type: recessed thermostat
• Connection voltage: 230 V
• Connected load: 3500 W
• Switching contact: 16 A
• Display: graphical
• Control range: +5...40 °C
• Setting resolution: per 0.5 ºC
• Temperature display: ± 0.1 ºC
• Program: 4 times a day
• Operation: touch screen
• On/off: press on display
• Settings: programmable
• Reset to factory setting: yes
• Timer: fully automatic
• Memory function: yes
• Frost protection: yes
• Sensor: internal + external
• Color: off white
• Installation depth: 32 mm
• Security class: IP20/21
• Included: floor sensor
• Manual: NL
• Quality mark: CE
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.