Water valve 3/4 inch | 2HB15

Product description

Easy-to-install water valve with three-quarter inch connection, like Gardena accessories. Works as an electrically operated supply valve.
The coil is cooled by the flowing water, so long-term switching is not a problem. When de-energised, the water supply is blocked.
This water valve works on the indirect principle, which means that pre-pressure from the water supply is required.

Applications

Water valve on 24 or 230 V

This compact electric water valve operates on safe low voltage of 24 volts. Only when the solenoid valve is energized will water pass through.
This valve is optionally available with matching 230 Volt mains adapter + connection cable with connector.

Mounting tips:

1.    Note the water flow direction (see arrow).
2.    Electrical connection at the top (must not get wet).
3.    Terminals not polarity-sensitive for + and -
4.    Fasten with 2 M3 screws.

Specifications

•    Article: plastic solenoid valve
•    External thread: 2x ¾ inch
•    Operating voltage: 24 Vdc
•    Current consumption: 0.4 A (400 mA)
•    Coil power 9.6 W
•    Operating pressure: 0.3...10 bar
•    Strainer: yes (on inlet side)
•    Type: NC = currentless closed
•    Material: plastic (polyamide)
•    Temperature: < 90 °C
•    Dimensions: 70x70x32 mm
•    Weight: 120 g
•    Connection: 2x AMP connector
•    Earth connection: yes
•    Quality mark: VDE

Option: mains adapter 24 Vdc - 1 A with cable and 2x AMP connector