Product description
Simple float switch with on/off switching contact. The mounting height determines the switching point when the liquid level changes.
This float switch is intended for tap water, rainwater, waste water and all kinds of other liquids or chemicals. Note: Not suitable for oil, petrol and diesel.
Applications
- detecting water level in tank or basin
- alarm message at level change
- potential-free switching contact for pump control
Float switch as alarm sensor
This float switch can be connected to a
water detector, instead of a water sensor or detection tape.
It has two connecting wires, which you can extend to 50 m if desired. When the water level rises, the float housing floats and the changeover contact switches.
Specifications
- Item: waterproof float
- Mounting: horizontal/lateral
- Material: polypropylene
- O-ring material: silicone
- Working temperature: -20...+80 °C
- Switch type: reed contact
- Switch contact: on / off
- Switching voltage: < 100 V
- Switching power: < 10 W
- Length: total approx. 85 mm
- Floating body: Ø 17 mm
- Up/down movement: 50 mm
- Fastening: nut M14
- Connecting wires: 2x 40 cm
- Weight: Approx. 23g
- Test mark: CE
Note: Not safe for 230 V switching.
*Please note that a basic knowledge of electrical engineering is required (for installation) when purchasing some products on our web shop.