Solenoid valve controls water flow

The solenoid valve can be controlled with 230 volts, e.g. via a water level controller. When its sensor detects water, the water supply is automatically shut off.
For this purpose, the water alarm must have a relay output suitable for switching 230 Volt mains voltage.
Options: half-inch (1/2"), three-quarter-inch (3/4") and inch (1"), with internal thread.

Only current consumption in open condition

Principle: the solenoid valve is closed current-free. This means that in normal condition, with the valve closed, it consumes no power. The orifice allows water to pass through after applying 230 V or 24 V power.
Robust industrial design. Coil orientation 360 degrees: may be mounted in any position. Price includes solenoid coil and 230 Volt or 24 Volt connector.

Magnetic valve - technical data

Control voltage: 230 V or 24 V
Connection: connector/ plug
NC = currentless closed
Options: ½" or ¾" or 1"
Input: mark 1
Output: mark 2
Material: brass and stainless steel
Operating pressure: 0.3...20 bar
Media temp: -10...+90 °C
Flushing capacity: 10 VA
Safety class: IP65
Quality mark: CE
Option: half inch
•    Fitting: 1/2" female thread
•    Max. volume: 63 litres/min
•    Weight: 400 g
Option: three-quarter inch
•    Fitting: 3/4" female thread
•    Max. volume: 90 litres/min
•    Weight: 600 g
Option: 1 inch
•    Fitting: 1" female thread
•    Max. volume: 160 litres/min
•    Weight: 800 g

Valve Ball Valve - Specifications

• Type: Ball valve
• Main connection: 230V
• Flow: < 216 l/min
• Working pressure: 0-10 bar
• Option: 2-way NC
• Connection: 1" internal
• Manufacturer: IC
• Material: stainless steel 304
• Weight: - g
• Temperature: -10...+90 °C
• Included: Connection wire 2-wire (choose without connector or control cable)
• Power consumption: < 10 VA
• Safety class: IP65
• Quality mark: CE